PQ Logger Mode
PQ Logger mode provides the ability to log measurements over an extended period of time to
find intermittent issues or trend data to discover the overall performance of the electrical
system. PQ Logger mode includes all the PQ Meter Mode functions as well as additional
measurements to customize the average period for each of the stored measurements and the
collection period.
In PQ Logger mode, the Analyzer guides you through the steps to collect measurements that
describe the health of the electrical system during the measurement period. The first screen
shown is the Measurement Settings screen that includes extra items compared to the
PQ Meter setup.
The extra items are:
Power Quality Standard
Mains signaling voltage
AUX (analog inputs)
See
PQ Meter Mode
PQ Logger Measurement Settings
The Measurement Settings screen enables the evaluation method for the captured
measurements.
Power Quality Standard
During the logging session, the measured values are captured and evaluated according to the
selected standard as the measurements are in progress. The ongoing results show on the
PQ Health screen as an overview of all measurements. See
more information.
To select the standard:
1. Tap on Power Quality Standard.
2. Choose the standard in the list.
3. Tap ENTER to make the selection.
If no selection is made, the Analyzer applies a default so that the PQ Health screen shows
some useful data.
1.800.561.8187
1.800.561.8187
for descriptions of other settings.
www.
www.
3 Phase Power Quality Analyzer
Measurement Configuration
Measurement Data Review
information@itm.com
information@itm.com
.com
.com
for
31