Connector Dimensions - Mitsubishi Electric TM-RFM Instruction Manual

4. CONNECTOR DIMENSIONS

4. CONNECTOR DIMENSIONS
The following shows the dimensions of the connectors used for wiring the direct drive motor.
(1) Hirose Electric
(a) RM15WTPZK-12S/RM15WTPZ-12P(72)
(b) JR13WCCA-8(72)
Refer to the connector configurations A and F of section 3.2 for the connector configuration.
(2) DDK
(a) CE05-6A14S-2SD-D
Refer to the connector configuration B of section 3.2 for the connector configuration.
Model
configuration (Note)
RM15WTPZK-12S
RM15WTPZ-12P(72)
Note. Refer to section 3.2 for the connector configuration.
Spanner hook gap dimension: 18
M19 × 1
Spanner hook gap dimension: 17
7/8-20UNEF-2B
Positioning key
4 - 1
Connector
A
F
[Unit: mm]
M16 × 0.75
36.3
[Unit: mm]
M16 × 0.75
7.5
(13.2)
3/4-20UNEF-2A
24.0 ± 1
5.6 ± 0.1
8.46 ± 0.5
[Unit: mm]