Introduction; Rating Plate; Parts Identification - Mitsubishi Electric TM-RFM Instruction Manual

1. INTRODUCTION

1. INTRODUCTION

1.1 Rating plate

The following shows an example of rating plate for explanation of each item.
Input power, rated torque, and mass
Insulation class, rated speed, and
maximum ambient temperature
Induced voltage constant, IP rating,
and serial number (Note 1)
Note 1. Production year and month of the direct drive motor are indicated in a serial number on the rating plate.
The year and month are indicated by the last two digits of the year and one digit of the month [1 to 9, X (10), Y (11), and Z
(12)].
For January 2012, the Serial No. is like, "SER. _ _ _ _ _ _ _ _ _ 121".
2. Products approved by Certification Bodies are marked. The marks depends on the Certification Bodies.

1.2 Parts identification

Model
(Note 2)
Z-phase mark
Encoder connector
Power supply connector
Power supply (U/V/W)
Grounding ( )
1 - 1
Conforming standards,
and Country of origin
Manufacturer
Rotor (output shaft)