Appendix 3.1 Offgan - Mitsubishi Electric Q64RD User Manual

APPENDIX

Appendix 3.1 OFFGAN

Internal device
Set data (System, user)
Bit
(S) —
[Instruction [Execution
symbol] condition]
G.OFFGAN
GP.OFFGAN
Device
Un Start I/O number of the module
Mode switching
0: Switching to normal mode
(S) 1: Switching to offset/gain setting mode
The setting of any other value results in "switching to
offset/gain setting mode".
App. - 4
Switches the mode of the Q64RD. (Normal mode to offset/gain setting mode,
offset/gain setting mode to normal mode)
MELSECNET/H
File Direct J \
register
Word Bit
Command
Command
Description
(1) Function
Switches the mode of the Q64RD.
• Normal mode to offset/gain setting mode
• Offset/gain setting mode to normal mode
POINT
(1) When the offset/gain setting mode is switched to the normal mode, Module
Ready (X0) turns from OFF to ON.
Note that initial setting processing will be executed if there is a sequence
program that makes initial setting when Module Ready (X0) turns ON.
(2) The error is cleared when the mode is switched.
(2) Operation error
No errors.
Usable devices
Special
function
register
module
Word
U \G
—
G.OFFGAN
GP.OFFGAN
Set data
MELSEC-Q
Index Constant
Z
K, H S
— —
Un
Un
Setting range
0 to FE
H
0 ,1
Other
—
(S)
(S)
Data type
Binary 16 bits
Binary 16 bits
App. - 4