4 SETUP AND PROCEDURES BEFORE OPERATION
Switches to offset/gain
setting mode
Switches to
normal mode
4 - 13
(b)
When switching the mode using the setting of the mode switching setting
(buffer memory addresses 158, 159: Un\G158, Un\G159) and operation
condition setting request (Y9)
Common program
(c)
When switching the mode by making intelligent function module switch
setting Only the common program is necessary.
Processing in normal mode
MELSEC-Q
Sets 4144
to buffer memory
H
address 158.
Sets 964
to buffer memory
H
address 159.
Turns ON operation condition
setting request (Y9).
Turns OFF operation condition
setting request (Y9)
Sets 964
to buffer memory
H
address 158.
Sets 4144
to buffer memory
H
address 159.
Turns ON operation condition
setting request (Y9).
Turns OFF operation condition
setting request (Y9).
4 - 13