Table of Contents
Advertisement
7 ONLINE MODULE CHANGE
7 - 11
(d)
Referring to (1), enable the conversion of the channels to be used, and
monitor the temperature measurement values (16 bits) (buffer memory
addresses 11 to 14: Un\G11 to 14) or temperature measurement values (32
bits) (buffer memory addresses 54 to 61: Un\G54 to 61) to check that
proper conversion has been made.
(e)
Executing module control resumption resumes control according to the
contents of the initial setting program. Make sure that the contents of the
initial setting program are correct.
(5) Resumption of control
(a)
After choosing [Diagnosis] - [Online module change] on GX Developer to
redisplay the "Online module change" screen, click the [Execution] button to
resume control. The FROM/TO instruction for the module resumes.
(b)
The "Online module change completed" screen appears.
MELSEC-Q
7 - 11
Advertisement
Table of Contents
Troubleshooting
