Special Functions; Appendix A : Physical Dimensions; Function Descriptions - Mitsubishi Electric Procon MOD-IP/50 Installation And User Manual

6. Special Functions

This section describes functions which can only be enabled via switches on
the MOD-IP/50 circuit board.
Disconnect the supply before removing the top cover
A
On
1 2
Off
Bank A
1: Auto-Detail
2: Unused.
Fig.5 Special Function Switches

6.1 Function Descriptions

Bank A-1: Auto-Detail
Off: Mode status reported as 'Auto', regardless of
which 'Auto' mode is active.
On: 'AutoHeat' or 'AutoCool' are reported, if active.
( This is the factory default setting ).
Bank A-2: Not used at present.
13

Appendix A : Physical Dimensions

A
B
B
A
10Base-T Serial Comms
Ethernet Port
The holes marked 'A' should be used when mounting the enclosure
on a back panel.
The holes marked 'B' can be used to attach the supplied din-rail
clips.
144mm
A
B
B
A
Enable Reset Power
Link Button Supply
Fig.6 Dimensions
14
104mm
34mm