Mitsubishi Electric Q64RD User Manual page 42

4 SETUP AND PROCEDURES BEFORE OPERATION
4.2 Setup and Procedures before Operation
Module mounting
Mount the Q64RD in the specified
slot.
Wiring
Wire external devices to the Q64RD.
Intelligent function module switch settings
Perform settings using GX Developer
(see Section 4.5).
Offset/gain setting
Initial setting and automatic refresh setting
The program can be simplified if the utility
package is used for setting (see Chapter 5).
Programming and debugging
Create and check the sequence program.
4 - 2
Start
Use user settings?
Use user range settings
If user settings are used, perform the
offset and gain settings (see Section 4.6).
Use the utility package?
YES
Use the factory setting.
NO
MELSEC-Q
4
4 - 2