Table of Contents
Advertisement
5 UTILITY PACKAGE (GX Configurator-TI)
5 - 4
(6) About the number of parameters that can be set in GX
Configurator-TI
The number of parameters that can be set by the GX Configurator for an
intelligent function module installed in the CPU module and in a remote I/O
station of the MELSECNET/H network system is limited.
Intelligent function module
installation object
Q00J/Q00/Q01CPU
Q02/Q02H/Q06H/Q12H/Q25HCPU
Q12PH/Q25PHCPU
MELSECNET/H remote I/O station
For example, if multiple intelligent function modules are installed in a remote I/O
station, set the GX Configurator so that the number of parameter settings of all
the intelligent function modules does not exceed the maximum number of
parameter settings.
The total number of parameter settings is calculated separately for the initial
setting and for the automatic refresh setting.
The number of parameter settings that can be set for one module in the GX
Configurator-TI is as shown below.
Object Module
Q64RD
Example) Counting the number of parameter settings in the automatic refresh
setting
Maximum number of parameter settings
Initial setting
512
512
512
512
Initial setting
5 (Fixed)
17 (Maximum number of settings)
The number of settings in this one line is
counted as one setting.
The number of settings is not counted by columns.
Add up all the setting items in this setting screen,
then add them to the total for the other intelligent
function modules to get a grand total.
MELSEC-Q
Automatic refresh setting
256
256
256
256
Automatic refresh setting
5 - 4
Advertisement
Table of Contents
Troubleshooting
