Robin SmartView SIP User Manual page 23

C
! Note: The number can be entered in multiple ways.
1. Just the number (e.g. 104, 1002, 6032 etc.). The handset is located on a connected IP-
PBX in the same network or using a VoIP provider.
2. The number, followed by the IP address of the handset that is to be dialled (e.g.
1000@10.0.0.53, 102@192.168.1.21 etc.). The handset and the Robin are connected
to each other directly, i.e. the call is not routed via a IP-PBX or VoIP provider. The Robin SV
dials the handset directly.
* Peer to Peer connection: If a direct connection between the Robin and a telephone set is
required - without the use of a IP-PBX or VoIP provider - please check our whitepaper: How-To_
Peer-to-ENG.pdf on the supplied USB drive or on our support website:
Profiles:
Define profiles. A profile is a set of audio- and video related settings.
The green '+' creates a new line.
The '>>' behind a line opens the details for this line.
The red X behind a line deletes the line from the list.
gf22
Manual Robin SV ENG - v. 3.2.0
http://support.robin.nl
22