Configuration; Logging In To The Robin - Robin SmartView SIP User Manual

C

5 Configuration

5.1 Logging in to the Robin

The Robin can be used accessed as an 'Administrator' or as a 'User'.
 The Administrator can configure all settings of the Robin. To initially configure the Robin you
will need to login as an Administrator.
 The User can only watch live video and optionally control the door opener. A User can't
modify settings of the Robin.
The login credentials can be changed in the web interface of the Robin. The default credentials are:
 Administrator - Login: admin, Password: 123qwe
 User - Login: user, Password: 123qwe
We recommend changing the default passwords after initial installation and set-up of the Robin.
We assume here that the network supports DHCP ('Dynamic Host Configuration Protocol'); if so, all
settings such as the IP addresses, netmask, gateway and DNS are automatically populated.
DHCP is a default setting of the Robin. If the network does not offer DHCP , the network details must
be set manually.
gf16
Manual Robin SV ENG - v. 3.2.0
16