Robin Smartview / Proline Sip Features - Robin SmartView SIP User Manual

gf6
Manual Robin SV ENG - v. 3.2.0
I
1.2 Robin SmartView / Robin SIP / ProLine SIP features
Easy to install
A single module is all that has to be mounted; there are no extra modules necessary.
Simple operation
The Robin devices with 1, 2 or 4 buttons are devices that can dial predefined phone extensions.
The door opener relay is activated via the device to which the call is directed. On the Robin devices
with keypad, the call is set up by typing a preset number on the keypad. It also features a PIN code
feature that can be used to unlock the door. All Robin intercoms with an integrated camera are
capable of sending e-mails containing a photograph of the person using the intercom to predefined
recipients.
SIP communication
The Robin uses the Session Initiation Protocol (SIP). This means that the intercom can be
connected to any IP-PBX or VoIP provider that supports the SIP protocol. To check compatibility
please see the compatibility chart on the supplied USB drive or on our support website: http://
support.robin.nl.
Door opener
The potential free (dry contact) relay switch embedded in the Robin is activated by typing in a key
combination at the dialled device. The key combination can be specified in the WEB-GUI of the
Robin. The relay can be used to open a door, a gate or a barrier.
Built-in camera (on Robin devices with build-in camera)
A real-time video image of the person using the Robin is displayed on the screen of the H.264
compatible videophone or softphone as soon as a call is answered.
! Note: When using an IP-PBX or VoIP provider, check the distributor of the IP-PBX or the VoIP
provider for H.264 video compatibility. !
High-Definition video quality (on Robin devices with build-in camera)
The build-in camera of the Robin is capable of displaying the video image in High-Definition.
The image can be set to an aspect ratio of 4x3 or 16x9. A maximum of three simultaneous video
streams is supported.
6