Robin SmartView SIP User Manual page 16

gf15
Manual Robin SV ENG - v. 3.2.0
S
Windows users:
Copy the 'Robin Discovery Utility' software to a PC that is connected to the network. Start the
'Robin Discovery Utility' software and click the "Play" button. The software will scan for Robin
devices in the network. When a Robin is detected, it is displayed in the list. Double-click on the
Robin you would like to configure; the web interface for the selected Robin will show.
Apple Macintosh users:
To detect and access the Robin on a Mac, use the Internet browser, 'Safari'. In the 'bookmark
overview' of Safari (option-command-B), you will see the 'Bonjour' section in the left-hand column.
It will display all the devices detected in your LAN network on the right-hand side of your window,
including the Robin. Double-click on the Robin you would like to configure; the web interface for
the selected Robin is displayed now.
Linux users:
Enter the IP address of the Robin in the address bar of the web browser that is installed on your PC
in order to access the web interface.
The Robin can now be configured via the web interface (see Chapter 5, Configuration).
15