System Installation; Requirements Prior To Installation; Connecting The Robin To A Network - Robin SmartView SIP User Manual

S

4 System installation

4.1 Requirements prior to installation

 Network connection with PoE (Power over Ethernet) is used to power the intercom; the
power supply must be 802.3af compatible).
 PC with web browser.
 The following web browsers are supported:
- FireFox
- Safari
- Google Chrome
 USB stick containing the 'Robin Discovery Utility' software and manuals (supplied)
 Network with or without DHCP support (DHCP support is recommended)
 Network cable
 Optional - Two-core cable for door switch operation

4.2 Connecting the Robin to a network

Connect the Robin to the network via the network connection socket on the rear. The Robin will
boot automatically. This can take up to 60 seconds.
! Note: The length of the Ethernet cable may not exceed 100 metres. This is a limit of the Ethernet
standard. !
! Note: Internet Explorer can be used for the base configuration of the Robin SV, but can not be
used for the 'AGC' and the 'Motion' settings. This is because Internet Explorer doesn't support
MJPEG video. !
gf14
Manual Robin SV ENG - v. 3.2.0
14