Controlling The Built-In Door Opener; Access Using A Pin Code (Robin Proline Sip With Keypad Only) - Robin SmartView SIP User Manual

gf9
Manual Robin SV ENG - v. 3.2.0
O

2.3 Controlling the built-in door opener

The built-in door opener is controlled with predefined keys on the telephone set that answers the
call. When you activate the door opener, the attached door, fence, barrier, etc. will open.
You can change the default code to open the door in the interface of the Robin in the menu
-System-Switch- (default code: ##).

2.4 Access using a PIN code (Robin ProLine SIP with keypad only)

The Robin with keypad can activate the door opener by entering a PIN code on the Keypad.This
PIN code is preset depended, so every preset can have his own PIN code. When the correct PIN
code is entered, the intercom can activate the build-in relay switch or an external relay switch using
the 'Events' mechanism.
To enter a PIN code on the intercom, start by pressing the '*'-key and end it by pressing the '#'-key.
Assuming the PIN code is 123456 you will need to enter: *123456# to unlock the door. When a
valid PIN code is entered a tune will be played by the intercom and the build-in relay switch will be
activated.
9