Robin SmartView SIP User Manual page 21

C
SIP advanced:
 Outbound proxy
 Outbound proxy host
 Outbound proxy port
 DNSsrv
---------------------------------
DSCP Class
 SIP DSCP Class
 Audio RTP DSCP Class
 Video RTP DSCP Class
---------------------------------
 Audio RTP port start
 Audio RTP port end
 Video RTP port start
 Video RTP port end
 RTP port random
 Use NAT
 Keep alive
 Enable REFER
gf20
Select this option when a SIP proxy server is used
Enter the IP address or hostname of the proxy server
Enter the IP port of the proxy server
Select this option when DNSsrv is used
------------------------------------------------------------------
The DSCP class is used for Quality of Service.
Select the DSCP class for all SIP traffic
Select the DSCP class for RTP audio
Select the DSCP class for RTP video
------------------------------------------------------------------
Enter the lowest IP port that may be used for the
RTP audio stream
Enter the highest IP port that may be used for the
RTP audio stream
Enter the lowest IP port that may be used for the
RTP video stream
Enter the highest IP port that may be used for the
RTP video stream
Use random RTP ports (within the specified range)
Select this option when an NAT firewall is set up
between the Robin and the SIP PBX or SIP provider.
(You can change the NAT settings in -Network-NAT-)
Enable keep alive packages
Accept 'REFER' packages (on by default)
Manual Robin SV ENG - v. 3.2.0
20