Configuration Of The On-Site Display; Factory Settings Of The On-Site Display For Interface Measurements; Adjustment Of The On-Site Display - Endress+Hauser Levelflex FMP55 Operating Instructions Manual

Levelflex FMP55 HART
Endress+Hauser
11.5

Configuration of the on-site display

11.5.1 Factory settings of the on-site display for interface
measurements
Parameter Factory setting for devices with 1 current
output
Format display 1 value, max. size
Value 1 display Interface linearized
Value 2 display Level linearized
Value 3 display Thickness upper layer
Value 4 display Current output 1
11.5.2

Adjustment of the on-site display

The on-site display can be adjusted in the following menu:
Setup → Advanced setup → Display
Commissioning via operating menu
Factory setting for devices with 2 current
outputs
1 value, max. size
Interface linearized
Level linearized
Current output 1
Current output 2
73