Free Text; Level Linearized - Endress+Hauser Levelflex FMP55 Operating Instructions Manual

Operating menu
Selection
Factory setting
Additional information

Free text

Navigation
Prerequisite
Description
User entry
Factory setting

Level linearized

Navigation
Description
Additional information
136
SI units
• STon
• t
• kg
• cm³
• dm³
• m³
• hl
• l
• %
Custom-specific units
Free text
%
The selected unit is only used to be indicated on the display. The measured value is not
transformed according to the selected unit.
It is also possible to configure a distance-to-distance linearization, i.e. a
transformation from the level unit to a different distance unit. To do so, select the
Linear linearization mode. In order to define the new level unit, select the Free text
option in the Unit after linearization parameter and enter the required unit into the
Free text parameter (→  136).
 Setup → Advanced setup → Linearization → Free text
Unit after linearization (→  135) = Free text
Enter unit symbol.
Up to 32 alphanumerical characters (letters, numbers, special characters)
Free text
 Setup → Advanced setup → Linearization → Level linearized
Displays linearized level.
• The unit is defined by the Unit after linearization parameter →  135.
• For interface measurements, this parameter always refers to the total level.
US units
• lb
• UsGal
• ft³
Levelflex FMP55 HART
Imperial units
impGal
Endress+Hauser
