Showing Content With People+Content™ Ip - Polycom 6000 User Manual

User Guide for Polycom QDX 6000 Room System
Showing Content with People+Content™ IP
12
People+Content™ IP allows you to send content from a computer that is not
connected directly to the Polycom QDX 6000 system.
Points to note about People+Content IP:
• People+Content IP provides video-only content. No audio is shared.
• People+Content IP supports any computer desktop resolution with color set to
16-bit or higher.
• People+Content must be enabled on the Polycom QDX 6000 system.
• The People+Content IP application must be installed on a computer.
To install People+Content IP on a computer:
1. On a computer with a Microsoft® Windows® XP, Windows 2000, or
Windows Vista operating system, open a web browser and go to the
Polycom web site at www.polycom.com/support.
2. Navigate to your product page.
3. Download and install the People+Content IP software.
To start showing content:
1. On the computer, start the Polycom People+Content IP application.
2. Enter the IP address or DNS host name of your video conferencing
system.
3. Click Connect.
4. Open the content you want to show, and do one of the following:
— Click in People+Content IP.
— Press Graphics on the video conferencing system's remote
control.
To stop showing content:
1. If the People+Content IP toolbar is minimized, maximize it by clicking
the icon in the task bar.
2. Do one of the following:
— Click in People+Content IP.
— Press Graphics on the video conferencing system's remote
control.
© Polycom, Inc.