Displaying The Far Site's Name When The Call Connects; Customizing Your Workspace; Allowing The Far Site To Control Your Camera - Polycom 6000 User Manual

Customizing Your Workspace

Allowing the Far Site to Control Your Camera

Displaying the Far Site's Name When the Call Connects

© Polycom, Inc.
Depending on how your system is configured, you may get locked out after a
certain number of failed login attempts. Contact your system administrator for
more information.
To log out:
 The system automatically logs out the current account when the system
goes to sleep.
You can customize what you see on the screen, depending on how your
system is configured.
If your system administrator has allowed access to user settings, you can allow
the far site to control your camera. Far-site participants can also set and use
presets for your camera, if their system supports this.
To allow the far site to control your camera:
1. Select System from the Place a Call screen.
2. Select User Settings from the System screen.
3. Scroll to Far Control of Near Camera and press
option.
4. Press Home to save your change and return to the home screen.
Changing this setting takes effect immediately, even if a call is in progress.
If your system administrator has allowed access to user settings, you can
specify whether to display the far site's name when the call connects and how
long to leave the name on the screen.
To specify when to display the name of the far site:
1. Select System from the Place a Call screen.
2. Select User Settings from the System screen.
User Guide for Polycom QDX 6000 Room System
to enable the
21