Controlling What You Hear; Adjusting Volume; Muting The Microphone - Polycom 6000 User Manual

User Guide for Polycom QDX 6000 Room System

Controlling What You Hear

Adjusting Volume

Muting the Microphone

10
Select this setting...
On
Auto
Off
To show the PIP during a call:
 Repeatedly press
available screen layouts. The PIP can change to show the near or far site.
Use the remote control to raise or lower the volume of the sound you hear.
To adjust the volume:
 Press Volume on the remote control.
Changing the volume affects only the sound you hear at your site.
You can mute the microphone if you do not want the far site to hear you.
To mute or unmute the microphone:
 Press Mute on the remote control.
If a Polycom microphone is connected to your system, you can also mute the
call by pressing
mute button
To set the PIP to ...
Stay on for the duration of the call.
Be shown when the user operates the
remote control and be turned off when the
user puts the remote control on the table
Be turned off during the call.
PIP on the remote control to scroll through the
on the microphone.
© Polycom, Inc.