Control Over Printing Quality - FLASHFORGE 3D PRINTER finder User Manual

needed. Press down the left mouse button and drag to generate the support.
2 Manual Delete
8-11
Like the picture above, a hole inside the model doesn't need any supports.
Left click the [Delete] button and then left click the supports needed deleting. And the
support will be deleted.

8.2 Control over Printing Quality

Enhance the build plate adhesiveness
Leveling the build plate
Keeping the build plate smooth and tidy
Using the build tape or glue
Adjusting the printing speed
Low (Fast) (Print Speed 80mm/s Travel Speed 100mm/s)
Standard (Print Speed 60mm/s Travel Speed 80mm/s)
High (Slow) (Print Speed 50mm/s Travel Speed 70mm/s)
Hyper (Print Speed 50mm/s Travel Speed 70mm/s)
8.3 Skills of Model Placement
Finder User Guide | www.flashforge.com
78
0086-0579-82273989