FLASHFORGE 3D PRINTER finder User Manual page 54

e. Click the [Restart]
Finder will connect with your computer via the WIFI that you've set up.
Disconnect Finder
Click[Print]--[Disconnect]
6.2.14 Tool Menus
Control Panel
After connecting PC with Finder,
panel.
Jog Controls
a. Jog Mode Select the distance that extruder/build plate move a single time (that is,
the distance extruder/build plate move upon your single click).
b. Six blue arrow direction button: Control the move along X/Y/Z axis. X/Y axis
button control extruder move, Z axis button control build plate move. Click X-,
extruder will move leftward a specified distance; Click X+, extruder will move a
specified distance rightward. Click Y-, extruder will move forward a specified distance;
Click Y-, extruder will move backward a specified distance. Click Z-, build plate will
Finder User Guide | www.flashforge.com
button. You need to restart your Finder's WIFI. And then your
to disconnect your PC and Finder.
click[Tools]--[Control Panel]
6-23
54
to open the control
0086-0579-82273989