FLASHFORGE 3D PRINTER finder User Manual page 39

Set View
Allows users to view the object on the build plate. Six views are under the view menu,
that is, home view, bottom view, top view, front view, back view, left view and right
view.
Method 1: Click the the
Method 2: Click the
will appear with six views for selecting.
Reset View
Allow users to reset views by the following two methods:
Method 1: Click the
Method 2:Clickthe
viewing options, you can click [Reset].
Show Model Outline
Click[View]--[Show Model
Show Steep Overhang
Click[View]--[Show Steep
model surface and horizontal line is within the overhang threshold value, the surface
has steep overhang and it becomes red in the software. Overhang threshold value
could be set as needed. The default value is 45 degree.
6.2.5
Move
Select the object and move the object by the following two methods:
Finder User Guide | www.flashforge.com
button, there are six views in the drop- down list
[View]
the[Look] icon
[View] menu and select
[View] button on the left, click it again and you will see the
Outline], it will highlight the yellow border ofthe object
Overhang]. When the intersection angle between the
on the left, click it again and a submenu
[Home View]
39
0086-0579-82273989