FLASHFORGE 3D PRINTER finder User Manual page 57

Step 3 Reboot you Finder and wait for 4-5 seconds, then you can see the update
process bar. When the update finishes, it will go back to the main interface.
Step 4 Tap[Tools]--[About] to check] to check whether the updated version is right.
On Board Preferences
When the computer and printer are in connection,
Preferences], you can check the printer name.
Machine information
When the computer and printer are in connection state, click
information], you can check the machine type, machine name and firmware etc.
6.2.15Help Menus
Help Contents Click
Check for Updates
updates online.
About FlashPrint Click
box will pop up. The contents include the current software version and copyright
information.
Finder User Guide | www.flashforge.com
6-24
[Help]--[Help Contents], you can read the help contents.
Click[Help]--[Check for Update]
[Help]--[About
6-25
57
click[Tools]--[On Board
[Tools]--[Machine
to detect the available
Flashprint], the software information
0086-0579-82273989