Call Block (Selective Call Rejection) - Polycom 400 User Manual

3. Answer the call to have the system automatically dial the
external number for you.
NOTE: You can access the line at any time by pressing the line
button, the speaker button or by picking up the handset. You
hear a message that all trunks are busy and you are queued for
the next available trunk. Press the Call Back soft key and hang
up to remain queued. If you hang up without pressing Call
Back, you are removed from the queue. While you are queued,
the line is unavailable for use.

Call Block (Selective Call Rejection)

Call Block (also known as Selective Call Rejection) allows you to
program your phone not to accept calls from a list of telephone
numbers. All calls from phones on the list receive a message which
says you are not accepting calls.
To use this feature (*60), you create a list of telephone numbers
(internal or external) that receive the message when a call with that
caller ID appears at your telephone.
Call Block is managed through a menu of commands activated by
pressing digits on the keypad. The menu commands are:
•
1 - Enable/disable feature
•
2 - Add last caller to blocked list
•
3 - Add numbers to blocked list
•
4 - List numbers to blocked list
•
5 - Delete numbers from blocked list
If you have a display on your telephone, the options for each menu
level appear on your display. For example, if you press 5 to delete
a number, the display will show:
"1=Num, 2=List, 3=Del All, *=Main Menu".
Polycom Telephone User Guide
621-00000092
VocalData Telephone Features 19