Star Codes - Polycom 400 User Manual

Star Codes

The codes used by analog DTMF users to activate features
(commonly referred to as "star codes") are also supported for IP
phones. By pressing the pound or star button on the telephone and
entering the proper code, you can make use of these codes for
feature use.
The feature must be active at your phone for it to be accessed from
the star codes (that is, you can't use features that aren't turned on)
and some caution should be used when activating features from
star codes, since they may not be reflected in display messages or
lamp activity on the telephone.
NOTE: This table lists the feature codes that are the default
values for your phone system at the time of installation. They
may be changed by your system administrator to meet the
needs of your company. Any list of feature codes given to you
by your system administrator should be used in place of the
codes listed here.
Feature Name
Abbreviated Dial - Program
Abbreviated Dial - Enable
Anonymous Call Rejection
Call Forward (All)
Call Forward (Busy) (On/Off)
Call Forward (No Answer)
(On/Off)
Call Return
Call Trace
Polycom Telephone User Guide
621-00000092
Table 1: Feature Matrix
75#
*3+code
*77
72#+number+#
76#+number+#
78#+number+#
*69
*57
Enable
VocalData Telephone Features
Disable
75#
N/A
*87
73# or 72##
77# or 76##
79# or 78##
N/A
N/A
67