Using The Remote Control - Polycom ViaVideo User Manual

Chapter 2

Using the Remote Control

Note: The far camera controls (far
camera movement and far camera
zoom) are not implemented in this
release. They will be implemented in a
future release.
ViaVideo User's Guide
When you place a call, a virtual remote control is displayed to the
right of the ViaVideo screen. The remote control lets you perform a
variety of calling functions.
Hangs up call
Toggles local
Picture-in-Picture
Far camera movement
(ViaVideo-ViewStation
calls only)
Far camera
zoom
Virtual keypad
(allows for DTMF
touchtone numbers)
Hang Up
PIP
Far Camera/Zoom The far camera controls are not supported in
Virtual Keypad
Terminates the current call. When you press this
button, the call is terminated.
Activates the Picture-in-Picture (PIP) window.
ViaVideo maintains the PIP setting between
calls.
this version of ViaVideo. They will be supported
in the next version of ViaVideo.
Lets you use Dual Tone Multi Frequency (DTMF)
touchtones. DTMF touchtones can be used
when you are making a call through an H.323
gatekeeper and you need to manually enter an
extension number.
See "H.323 Setup," on page 51 for more
information.
16
Using ViaVideo
Snapshot
Volume
Audio mute
Application sharing
www.polycom.com