Through A Virtual Private Network; Configure Your Connection; Simple Connection - Just A Modem, Thanks; Router With Nat, No Firewall - Polycom ViaVideo User Manual

Appendix

Through a Virtual Private Network

Configure Your Connection

Simple Connection - Just a Modem, Thanks

Router With NAT, No Firewall

© Polycom, Inc.
If your network connection is through a Virtual Private Network
(VPN), use the configuration instructions on page 70.
And you're ready to communicate ViaVideo!
If you are using a cable modem or DSL modem, you don't need to
make any configuration adjustments. Because of the limited
bandwidth available, it is recommended that you select a lower line
speed, such as 128, for most calls. Select line speeds in the Dialing
Speeds screen (System Info>Setup>H.323>Dialing Speeds).
To configure your ViaVideo to use your router's Network Address
Translator (NAT):
1. Go to the Quality of Service and Firewall screen (System
Info>Setup>H.323>QOS).
65
Network Connection
ViaVideo User's Guide