Documentation; Connecting The Printer; Printing - wtw Turb 550 Operating Manual

4.5

Documentation

If the instrument is connected to a printer or PC, the mea-
sured values can be documented via the printer or PC. In-
formation on suitable cables and the printer is given in 8
A (
CCESSORIES OPTIONS

4.5.1 Connecting the printer

1 Plug the printer cable into the RS232 interface (1) of
the instrument
2 Connect the printer cable to the printer

4.5.2 Printing

Note
Printing can only function if the measuring instrument is
switched on and the print function is active (on). In addition,
the correct Baud rate must be set up (4800 Baud).
1 Switch on the printer
2 Press the
together with the time and date.
).
key. The measured value is printed
Operation
1
35