Measuring Turbidity Using The Flow-Through; Vessel (Accessory) - wtw Turb 555 Operating Manual

Turb 555 / Turb 555 IR
Connection values
ba41113e07 04/2009

4.2.4 Measuring turbidity using the flow-through

vessel (accessory)

The flow-through vessel (WTW order number 600605) fits to
each Turb 555 /Turb 555 IR instrument and enables you to
continuously measure a sample flowing through and to no-
tice turbidity changes immediately. Using the periodical
measured value output, you can output the current mea-
sured values periodically to a printer or PC connected.
Maximum pressure:
Recommended flow-
through quantity:
Note
Measuring with the flow-through vessel makes it necessary
to purge the cuvette shaft with dry air or nitrogen. Otherwise,
the outside of the cuvette may mist up after pouring in due
to a cold sample, causing the measured value to be much
too high.
1 Flow-through vessel
2 Inlet hose
3 Outlet hose
4 bar (60 psi)
2-5.5 l/min (0.5-1.5 gpm)
Operation
29