wtw Turb 555 Operating Manual page 33

Turb 555 / Turb 555 IR
Connecting the
cuvette shaft
purging
Supply values
Measuring
ba41113e07 04/2009
Proceed as follows:
1 Connect the purging gas source to the fitting (1) on
the back of the instrument using a suitable hose.
2 Turn on the purging gas.
3 Adjust supply values.
Maximum pressure:
Recommended flow-
through quantity:
1 Provide sample flow.
2 Read the measured value.
3 How to output measured values to the printer or PC
refer to section 4.6.2 O
4 bar (60 psi)
2-5.5 l/min (0.5-1.5 gpm)
UTPUT OF MEASURED VALUES
Operation
.
33