Power Switch; Lid; Lid Release - Hermle Z 207 A Operating Manual

OPERATING

2.2 Power Switch

The power switch is located on the back side of the centrifuge (Figure 9).
Figure 9
ATTENTION:
After turning on the power switch, open the centrifuge lid first, before starting the centrifuge.

2.3 Lid

2.3.1 Lid Release

After the run, properly close the lid of the centrifuge, appearing in the display, "rpm/rcf"(A-1) with the
word, "close" (M1). At the same time the actual rotor type "221.57" is shown in the display. By
pressing the key, "lid" (10), the lid of centrifuge can be released. As soon as the lid is completely
released, the word, "open" (M2) appears. The lid of the centrifuge is now able to be opened.
For all number marked text, please refer to Figure 10.
Figure 10
12
Z207A_V1.17
_eng © Hermle Labortechnik GmbH