Cutting Position Adjustment With Automatic Roll Paper Cutter - Epson Stylus PHOTO 950 User Manual

4. Select the Auto Cutter Attached check box.
5. Click OK to exit this menu.
Note:
After you attach the cutter, make sure to adjust the cutting position
to improve its precision. In addition, if you set the different Paper
Type/Paper Width roll paper, it is recommended that you use the
Auto Cut mode after adjusting the cutting position. Refer to the

"Cutting position adjustment with Automatic Roll Paper Cutter"

on page 60 for more details about the cutting position adjustment.
Cutting position adjustment with Automatic Roll
Paper Cutter
After you attach the cutter, make sure to adjust the cutting
position to improve its precision.
Note:
Before doing the following, it is necessary to turn the printer on and
set the roll paper. Refer to "Loading the roll paper" on page 33 for
more details about the roll paper setting.
Using Automatic Roll Paper Cutter
4
4
4
4
4
4
4
4
4
4
4
4
60