Epson Stylus PHOTO 950 User Manual page 162

Printable Area Use this option in the Printable Area Box to adjust the
total area available for printing when Sheet Feeder
and Manual Feed Slot is selected as the Paper Source
setting. Standard and Maximum are only available
when Sheet Feeder is selected. This feature is not
available when No Margins or Roll Paper is selected.
To center the printout, select Centered. To increase
the printable area at the bottom edge from 14 mm to
3 mm, select Maximum.
Note:
The print quality may decline at the edges of the
printout when Maximum is selected as the Printable
Area setting. Before printing large jobs using this
setting, print a single sheet to confirm quality.
When Maximum is selected, make sure that the paper
loaded in the sheet feeder is not curled.
Do not select Maximum while using Premium Glossy
Photo Paper. If you select Maximum when printing on
Premium Glossy Photo Paper, your printout may be
smeared in the expanded area (between 14 mm and
3 mm from the bottom edge).
153
Printing with Windows