Epson Stylus PHOTO 950 User Manual page 35

Note:
Flatten the paper before loading.
Do not load the paper whose corner is folded.
Use the white paper only.
7. To load the matte board whose thickness is 0.4 mm to 1.6 mm,
return the adjust lever to the ^ position. To load the matte
board whose thickness is 1.7 mm to 2.5 mm, return the adjust
lever to the position.
Note:
Do not move the adjust lever during printing; this may damage
the printer.
Return the adjust lever to the m position after printing on the
matte board. Printing on the paper with ^ or position may
blur the print quality.
8. Close the printer cover, then press the m paper button. The
matte board will feed automatically into the printer.
Paper Handling
1
1
1
1
1
1
1
1
1
1
1
1
26