1. After making sure that the Auto Cutter Attached check box
is selected, click the Auto Cutter Adjustment button. The
Auto Cutter Adjustment dialog box opens.
Note:
If the Auto Cutter Adjustment button is not available, make sure
that the Auto Cutter Attached check box is selected. If it is not
selected, the Auto Cutter Adjustment button is not available. In
addition, you cannot use the cutter.
2. After making sure that the roll paper is set, click the Print
button. The cutting position adjustment pattern is printed and
cut off.
Using the Printer Software for Macintosh
8
8
8
8
8
8
8
8
8
8
8
8
234