Epson Stylus PHOTO 950 User Manual page 225

5. Click OK to return to the Page Setup dialog box, then click OK
to save your settings.
6. Load paper in the sheet feeder, then send the print job from
your application. Instructions for generating the
even-numbered pages will be displayed while the
odd-numbered pages are output.
7. Follow the instructions to reload the paper, or reload the
paper as shown in the illustration below.
Note:
The paper may curl during printing due to the amount of ink
used. Should this occur, slightly curl the sheets in the opposite
direction prior to reloading them into the printer.
Align the sheet stack by tapping its edges against a hard, flat
surface prior to reloading the stack into the printer.
Follow the instructions provided when reloading the printouts.
Paper jams or improperly placed binding margins may occur if
the printouts are not reloaded correctly.
In the event of a paper jam, refer to "Paper Does Not Feed
Correctly" on page 313.
Using the Printer Software for Macintosh
8
8
8
8
8
8
8
8
8
8
8
8
216