Epson Stylus PHOTO 950 User Manual page 167

3. Specify the edge of the paper where the binding will be
placed. You can choose between Left, Top, and Right.
4. Specify the width of the binding margin using the Binding
Margin text box. You can specify any width from 3 mm to 30
mm.
Note:
The actual binding margin may vary from the specified settings
depending on your application. Experiment with a few sheets to
examine actual results prior to printing the entire job.
5. Click OK to return to the Layout menu, then click OK to save
your settings.
6. Load paper in the sheet feeder, then send the print job from
your application. Instructions for generating the
even-numbered pages will be displayed while the
odd-numbered pages are output.
7. Follow the instructions displayed to reload the paper, or
reload the paper as shown in the illustration below.
Note:
The paper may curl during printing due to the amount of ink
used. Should this occur, slightly curl the sheets in the opposite
direction prior to reloading them into the printer.
Align the sheet stack by tapping its edges against a hard, flat
surface prior to reloading the stack into the printer.
Follow the instructions provided when reloading the printouts.
Paper jams or improperly placed binding margins may occur if
the printouts are not reloaded correctly.
Printing with Windows
6
6
6
6
6
6
6
6
6
6
6
6
158