Epson Stylus PHOTO 950 User Manual page 52

Note:
Do not select Sheet Feeder as the Paper Source setting in the printer
software when roll paper is loaded in the sheet feeder. Doing so
causes unnecessary paper to be fed after each print job. If you have
already started printing, cancel the print job from the printer
software referring to "Cancelling Printing" on page 325. Wait until
the printer stops printing and feeding paper. Cut off the paper at the
back of the printer, then turn off the printer. The remaining paper
is ejected.
4. If the cutter is attached, select the types of cutting from the
Auto Cut list box.
The Auto Cut settings are as follows:
Not Cut
Single Cut
43
Using Roll Paper
No cutting with the cutter is done.
The paper is cut at the boundary between images
(the boundary between pages). However, the
cutting position may shift slightly.