Epson Stylus PHOTO 950 User Manual page 227

A booklet can be created by printing pages 1 and 4 on the first
sheet of paper, pages 5 and 8 on the second sheet of paper, and
pages 9 and 12 on the third sheet of paper. After these sheets are
reloaded into the sheet feeder, you can then print pages 2 and 3
on the back of the first sheet of paper, pages 6 and 7 on the back
of the second sheet of paper, and pages 10 and 11 on the back of
the third sheet of paper. The resulting pages can then be folded
and bound together into a booklet.
Use the following steps to create a booklet as described above.
1. Select the Double-Sided Printing check box in the Page Setup
dialog box, then select the Folded Booklet check box.
2. Click the Margins button. The Margins dialog box will
appear.
3. Specify the edge of the paper where the binding will be
placed. You can choose from Left, Top, and Right.
Note:
When Portrait is selected as the Orientation setting in the printer
driver, Left or Right binding positions are available. The Top
binding position is supported when Landscape is selected as the
Orientation setting.
4. Specify the width of the binding margin using the Binding
Margin text box. You can specify any width from 3 mm to 30
mm. The specified margin width will be used on both sides
of the fold. For example, if a 10-mm margin is specified, a
20-mm margin will be inserted (a margin of 10 mm will be
placed on each side of the fold).
Using the Printer Software for Macintosh
8
8
8
8
8
8
8
8
8
8
8
8
218