Ing Feature - Epson Stylus PHOTO 950 User Manual

If the paper does not completely eject, press the
button, then open the printer cover and remove the paper.
Also, check the Paper Size setting in your application or
printer software.
If the paper is wrinkled when it comes out, it may be damp
or too thin. Load a new stack.
Note:
Store any unused paper in its original package in a dry area. See "Paper"
on page 336 for specifications.
Paper does not feed correctly when using the
double-sided printing feature
If multiple pages are simultaneously misfed into the printer when
using the double-sided printing feature, remove the paper as
instructed in "Multiple pages feed" on page 314. If the paper that
was fed in error has not been creased or wrinkled, it may still be
usable. Reload only the usable paper properly into the printer.
If a paper jam should occur while using the double-sided printing
feature, remove the paper as instructed in "The paper jams" on
page 315. If multiple print jobs have been sent to the printer when
the paper jam occurs, check the page settings in your application
and confirm that the paper is loaded properly to ensure that no
pages are skipped and that the document is printed correctly.
CD-R Tray does not feed correctly
Make sure of the following:
The front sheet feeder was set before setting the CD-R tray.
The CD-R tray is inserted properly along the right side of the
front sheet feeder.
paper
m
Troubleshooting
15
15
15
15
15
15
15
15
15
15
15
15
316