Epson Stylus PHOTO 950 User Manual page 80

Note:
For details on accessing the software, refer to the application's user
manual. In many applications, you can select Print directly from the
File menu, then access the printer software by clicking the
Properties button.
3. Click the Paper tab, select Roll Paper for Paper Source, and
select the appropriate page size.
Note:
Do not select Sheet Feeder as the Paper Source setting in the printer
software when roll paper is loaded in the sheet feeder. Doing so
causes unnecessary paper to be fed after each print job. If you have
already started printing, cancel the print job from the printer
software referring to "Cancelling Printing" on page 325. Wait until
the printer stops printing and feeding paper. Cut off the paper at the
back of the printer, then turn off the printer. The remaining paper
is ejected.
71
Using Automatic Roll Paper Cutter