Transporting The Printer - Epson Stylus PHOTO 950 User Manual

Caution:
c

Transporting the Printer

If you need to transport your printer, carefully prepare and repack
it as described below using the original box (or a similar box that
the printer fits snugly into) and packing materials. Follow the
steps below.
Caution:
c
1. Open the printer cover and make sure that the print head is
in the home (far right) position. If not, turn on the printer and
wait until the print head returns to the home position. Close
the printer cover, then turn off and unplug the printer.
2. Disconnect the interface cable from the printer.
293
Maintenance
Never use alcohols or thinners to clean the printer; these
chemicals can damage the components as well as the case.
Be careful not to get water on the printer mechanism or
electronic components.
Do not use a hard or abrasive brush.
Do not spray the inside of the printer with lubricants.
Unsuitable oils can damage the mechanism. Contact your
dealer or a qualified service person if lubrication is needed.
When storing or transporting the printer, don't tilt it, stand
it on its side or turn it upside down. Otherwise ink may leak
from the cartridge.
Leave the ink cartridges installed. Removing the cartridges
dehydrate the print head and may prevent the printer from
printing.