Table of Contents
Advertisement
Common Configuration Tasks
This section provides a brief overview of the tasks that must be performed for both IP and MAC
filter configurations and provides the CLI commands.
To configure a filter policy, perform the following tasks:
•
•
•
•
•
•
Creating an IP Filter Policy
Configuring and applying filter policies is optional. Each filter policy must have the following:
•
•
•
•
•
IP Filter Policy
The following displays an exclusive filter policy configuration example:
A:ALA-7>config>filter# info
----------------------------------------------
...
...
----------------------------------------------
A:ALA-7>config>filter#
7710 SR OS Router Configuration Guide
Creating an IP Filter Policy on page 325
Creating an IPv6 Filter Policy on page 330
Creating a MAC Filter Policy on page 332
Creating Filter Log Policies on page 337
Applying Filter Policies on page 338
Apply Filter Policies to a Network Port on page 341
The filter type specified (IP)
A filter policy ID
A default action, either drop or forward
Filter policy scope specified, either exclusive or template
At least one filter entry with matching criteria specified
ip-filter 12 create
description "IP-filter"
scope exclusive
exit
Filter Policies
Page 325
Advertisement
Table of Contents
