Table of Contents
Advertisement
network-domain
Syntax
network-domain network-domain-name
no network-domain
Context
config>router>interface
Description
This command assigns a given interface to a given network-domain. The network-domain is then
taken into account during sap-ingress queue allocation for VPLS SAP.
The network-domain association can only be done in a base-routing context. Associating a network
domain with an loop-back or system interface will be rejected. Associating a network-domain with an
interface that has no physical port specified will be accepted, but will have no effect as long as a
corresponding port, or LAG, is defined..
Single interfaces can be associated with multiple network-domains.
Default
per default "default" network domain is assigned
ntp-broadcast
Syntax
[no] ntp-broadcast
Context
config>router>interface
Description
This command enables SNTP broadcasts received on the IP interface. This parameter is only valid
when the SNTP broadcast-client global parameter is configured.
The no form of the command disables SNTP broadcast received on the IP interface.
Default
no ntp-broadcast
port
Syntax
port port-name
no port
Context
config>router>interface
Description
This command creates an association with a logical IP interface and a physical port.
An interface can also be associated with the system (loopback address).
The command returns an error if the interface is already associated with another port or the system. In
this case, the association must be deleted before the command is re-attempted. The port-id can be in
one of the following forms:
7710 SR OS Router Configuration Guide
•
Ethernet Interfaces
IP Router Configuration
Page 109
Advertisement
Table of Contents
