By default, generation of ICMP destination unreachables messages is enabled at a maximum rate of
100 per 10 second time interval.
The no form of the command disables the generation of ICMP destination unreachables on the router
interface.
Default
unreachables 100 10 — Maximum of 100 unreachable messages in 10 seconds.
Parameters
number — The maximum number of ICMP unreachable messages to send, expressed as a decimal
seconds — The time frame, in seconds, used to limit the number of ICMP unreachable messages that
7710 SR OS Router Configuration Guide
integer. The seconds parameter must also be specified.
Values
10 — 1000
can be issued, expressed as a decimal integer.
IP Router Configuration
Page 125