Apply Filter Policies to a Network Port
IP filter policies can be applied to network IP interfaces. MAC filters cannot be applied to network
IP interfaces or to routable IES services. IPv6 filter policies can be applied to network IP interfaces
in the IPv6 context within the interface configuration.
Apply an IP Interface
CLI Syntax: config>router# interface ip-int-name
The following displays an IP filter applied to an interface at ingress.
A:ALA-48>config>router# info
#------------------------------------------
# IP Configuration
#------------------------------------------
...
...
#------------------------------------------
A:ALA-48>config>router#
7710 SR OS Router Configuration Guide
interface "to-104"
address 10.0.0.103/24
port 1/1/1
ingress
filter ip 10
exit
egress
filter ip 10
exit
exit
Filter Policies
Page 341