Alcatel 7710 SR OS Configuration Manual page 89

fib-priority
Syntax fib-priority {high | standard}
Context config>router
Description This command specifies the FIB priority for VPRN.
ignore-icmp-redirect
Syntax [no] ignore-icmp-redirect
Context config>router
Description
This command drops ICMP redirects received on the management interface.
The no form of the command accepts ICMP redirects received on the management interface.
mc-maximum-routes
Syntax mc-maximum-routes number [log-only] [threshold threshold]
no mc-maximum-routes
Context config>router
Description This command specifies the maximum number of multicast routes that can be held within a VPN
routing/forwarding (VRF) context. When this limit is reached, a log and SNMP trap are sent. If the
log-only parameter is not specified and the maximum-routes value is set below the existing number
of routes in a VRF, then no new joins will be processed.
The no form of the command disables the limit of multicast routes within a VRF context. Issue the no
form of the command only when the VPRN instance is shutdown.
Default no mc-maximum-routes
Parameters
number — Specifies the maximum number of routes to be held in a VRF context.
log-only — Specifies that if the maximum limit is reached, only log the event. log-only does not
threshold threshold — The percentage at which a warning log message and SNMP trap should be
7710 SR OS Router Configuration Guide
Values 1 — 2147483647
disable the learning of new routes.
sent.
Values
0 — 100
Default
10
IP Router Configuration
Page 89