Alcatel 7710 SR OS Configuration Manual page 110

Configuration Commands
The no form of the command deletes the association with the port. The no form of this command can
only be performed when the interface is administratively down.
Default No port is associated with the IP interface.
Parameters
port-id — The physical port identifier to associate with the IP interface.
proxy-arp-policy
Syntax [no] proxy-arp-policy policy-name [policy-name...(up to 5 max)]
Context config>router>interface
Description This command enables and configure proxy ARP on the interface and specifies an existing policy-
statement to analyze match and action criteria that controls the flow of routing information to and
from a given protocol, set of protocols, or a particular neighbor. The policy-name is configured in the
config>router>policy-options context.
Use proxy ARP so the 7710 SR responds to ARP requests on behalf of another device. Static ARP is
used when a 7710 SR needs to know about a device on an interface that cannot or does not respond to
ARP requests. Thus, the 7710 SR OS configuration can state that if it has a packet that has a certain
IP address to send it to the corresponding ARP address.
Default
no proxy-arp-policy
Parameters
policy-name — The export route policy name. Allowed values are any string up to 32 characters long
Page 110
If the card in the slot has MDAs, port-id is in the slot_number/MDA_number/port_number
format; for example, 1/1/3 specifies port 3 of the MDA installed in MDA slot 1 on the card
installed in chassis slot 1.
• SONET/SDH interfaces
When the port-id represents a POS interface, the port-id must include the channel-id. The POS
interface must be configured as a network port.
Values port-id slot/mda/port[.channel]
bundle-id
bpgrp-id
aps-id
lag-id
composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $,
bundle-type-slot/mda.bundle-num
bundle keyword
type ima, ppp
bundle-num 1 — 336
bpgrp-type-bpgrp-num
bpgrp keyword
type ima, ppp
bpgrp-num 1 — 256
aps-group-id[.channel]
aps keyword
group-id 1 — 16
lag-id
lag keyword
id 1 — 64
7710 SR OS Router Configuration Guide